Is the autoreflex T or the autoreflex t3 the better option?
Also: What steps are needed to deal with the battery issue?
That makes sense, thanks. So it probably would be best if I just put in two LR44 batteries in and just set exposure manually? Then the cameras would work fine? Sorry if I‘m a bit slow, just getting into this. Thank you in advanceThe T3 is newer and has a couple of nice improvements on it, but if they both are in good condition, they will give similar results.
@Paul Howell 's suggestion about the batteries works - he is probably referring to Wein cells designed for the purpose.
There are a couple of other approaches to buying adapters and appropriate to those adapters that work together as a solution. One gives relatively short battery life with smaller hearing aid batteries, but the prices of those adapters and batteries are low. The higher priced adapters can be used with more expensive but much longer life silver oxide batteries. I have and have used both.
Some cameras can also be modified by repair technicians to take silver oxide batteries directly. If you should decide to have the cameras serviced, it would be worthwhile to ask about that.
IIRC, both cameras will work fine without batteries if you are prepared to use a separate hand meter and set exposure manually.
I have both, the T3 has a few additional features, as the first generation AR mount body T is a bit more basic. The T3, many came with a split image screen and mirror lock up. Both flash sync at 1/125th. I recall if there were any differences in the built in meter. My T3 has a built in hot shoe while the Ts I have a add on shoe, not a hot shoe. Other than using hearing aid batteries you might find a repair tech who can adjust the meter for a modern battery. I just use hearing aid batteries, they 625 fit without an adaptor. The Konica branded lens are some of best glass I have ever used.
Here is a link to the manual for the T, the same site has the T3 as well.
Yep hearing aid batteries, that all I use in my Konicas. I have an adaptor for my Minolta 101 and 202, but the 625 hearing aid battery fits the Konica just fine. My Konica meters match my Gossan SCB meter within a 1/2 stop.
View attachment 394066
Yep hearing aid batteries, that all I use in my Konicas. I have an adaptor for my Minolta 101 and 202, but the 625 hearing aid battery fits the Konica just fine. My Konica meters match my Gossan SCB meter within a 1/2 stop.
View attachment 394066
That makes sense, thanks. So it probably would be best if I just put in two LR44 batteries in and just set exposure manually? Then the cameras would work fine? Sorry if I‘m a bit slow, just getting into this. Thank you in advance
@Paul Howell - those are the smaller 675 batteries.
They work with either:
a) an o-ring or something else that keeps them centred in the larger 625 battery compartment, or
b) one of those purpose made adapters that does the same thing.
The adapters - or some very carefully cut and positioned aluminum foil - ensure that you can use the small number of cameras that rely on making electrical contact with the edges of the battery - most only require that the two faces of the battery are contacted.
If you haven't done anything to make sure the 675 battery stays where it should be in the middle of the battery compartment, it may be that you have not had problems with your Konica cameras because the "spring" tension on the connectors is strong enough to hold the battery stationery. That isn't the case with every camera.
You don't have to put any batteries to make the Konica Autoreflex cameras work. You just need to set the camera settings manually. The batteries just power the meter.
That is not the case with the Canon or the Olympus cameras - they need batteries to function at all.
I suspect the Minolta will require batteries to function.
@Paul Howell - those are the smaller 675 batteries.
They work with either:
a) an o-ring or something else that keeps them centred in the larger 625 battery compartment, or
In my early post I stated 625, the correct battery is 675, my mistake. The Konica T cameras used 675 no adaptor ring is needed. I do use an adaptor when I use 675 batteries in my Minolta 101 and 102, Petri. Topcon Uni 100 also takes 675.
This makes me smile.Well that is actually so cool. A completely 100% manual camera.
@Paul Howell - those are the smaller 675 batteries.
They work with either:
a) an o-ring or something else that keeps them centred in the larger 625 battery compartment, or
In my early post I stated 625, the correct battery is 675, my mistake. The Konica T cameras used 675 no adaptor ring is needed. I do use an adaptor when I use 675 batteries in my Minolta 101 and 102, Petri. Topcon Uni 100 also takes 675.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?