Good friend of mine, Piotr , has some stuff for sale. Please contact direct to Piotr if you are interested in. His email address: ajsikel@gmail.com.
For sale is my great enlarger from the KIENZLE stable, Germany.
The enlargers by Wolfgang Kienzle are still being manufactured, this ensures that eny repairs, modifications or spare parts are easily available.
570 $
shipping costs not included
Images here :
http://pokazywarka.pl/2j14qn/
KIENZLE enlargers are well sought after due to their robust quality and superb performance.
Their design is the one like of FOCOMATs, KIENZLE owns the FOCOMAT engineering drawings.
People who own FOCOMATs know that their quality is top notch.
The gear I`m selling is in great condition.
No rust, no dents, no flaws.
All parts moving buttery smooth, the springs, the column is in finest condition.
The lamphouse has a minor flaw, since it has the plastic cover, it happend that when I installed the halogen of exceeding voltage, due to the heat the cover slightly became deformed.
It is visible on the photo.
The deformation do not influence its performance. The halogen was promptly exchanged for the right one within minutes, however, the deformation of the plastic remained.
The functions of the enlarger are all perfect.
Negative holders slide in finely, the pressure of the antinewton glass and the holders is regulated by the two screws below when the holders are slid in.
They really hold the negatives tight and with security.
The halogens and colour head ensures even and delicate light distribution, no visible dust on the prints, hence.
The kit is as follows:
1. The enlarger
2. the baseboard - heavy , thick and really in great condition
3. 35mm negative holder
4. 6x6 negative holder ordered from KIENZLE
5. spare 6x6 negative holder, might be used for spares
6. 35mm lens metal tubus
7. 6x6 lens metal tubus
8. transformer for the color head
9. DUNCO colour head
NO LENSES for sale in this configuration
( if any one is interested I might sell them as well: 50mm f2.8 COMPONON S , 80mm f4 COMPONON S )
The enlarger served me a lot, I couldnt think of better gear for my job ,its solidly built, cast iron, finely operating, quite compact but with absolutely great performance.
They do not appear often for sale, once they do, they disappear quickly bought.
The person that buys that, will not regret any money spent. Believe me.
At least I do not regret.
This is sold from EU, Poland, and will be shipped from Poland.
It must be shipped in TWO packages, one enlarger, one baseboard.
Baseboard alone is around 30 pound itself , enlarger much around the same.
Surely , I might arrange international shipping, costs depending on the destination.
I predict costs around 37-40EU.
pm me please.
ajsikel@gmail.com
For sale is my great enlarger from the KIENZLE stable, Germany.
The enlargers by Wolfgang Kienzle are still being manufactured, this ensures that eny repairs, modifications or spare parts are easily available.
570 $
shipping costs not included
Images here :
http://pokazywarka.pl/2j14qn/
KIENZLE enlargers are well sought after due to their robust quality and superb performance.
Their design is the one like of FOCOMATs, KIENZLE owns the FOCOMAT engineering drawings.
People who own FOCOMATs know that their quality is top notch.
The gear I`m selling is in great condition.
No rust, no dents, no flaws.
All parts moving buttery smooth, the springs, the column is in finest condition.
The lamphouse has a minor flaw, since it has the plastic cover, it happend that when I installed the halogen of exceeding voltage, due to the heat the cover slightly became deformed.
It is visible on the photo.
The deformation do not influence its performance. The halogen was promptly exchanged for the right one within minutes, however, the deformation of the plastic remained.
The functions of the enlarger are all perfect.
Negative holders slide in finely, the pressure of the antinewton glass and the holders is regulated by the two screws below when the holders are slid in.
They really hold the negatives tight and with security.
The halogens and colour head ensures even and delicate light distribution, no visible dust on the prints, hence.
The kit is as follows:
1. The enlarger
2. the baseboard - heavy , thick and really in great condition
3. 35mm negative holder
4. 6x6 negative holder ordered from KIENZLE
5. spare 6x6 negative holder, might be used for spares
6. 35mm lens metal tubus
7. 6x6 lens metal tubus
8. transformer for the color head
9. DUNCO colour head
NO LENSES for sale in this configuration
( if any one is interested I might sell them as well: 50mm f2.8 COMPONON S , 80mm f4 COMPONON S )
The enlarger served me a lot, I couldnt think of better gear for my job ,its solidly built, cast iron, finely operating, quite compact but with absolutely great performance.
They do not appear often for sale, once they do, they disappear quickly bought.
The person that buys that, will not regret any money spent. Believe me.
At least I do not regret.
This is sold from EU, Poland, and will be shipped from Poland.
It must be shipped in TWO packages, one enlarger, one baseboard.
Baseboard alone is around 30 pound itself , enlarger much around the same.
Surely , I might arrange international shipping, costs depending on the destination.
I predict costs around 37-40EU.
pm me please.
ajsikel@gmail.com
