Iqsmart Scanner upper glass assembly issue

sunhouwang

Member
Joined
Apr 4, 2017
Messages
40
Location
China
Format
Large Format
I have made an upper replacement glass for the iqsmart 3 scanner.

Now there are 6 limit plates and matching screws. But I have forgotten to how to assemble them back, my poor memory.

From the upper cover, there should be 6 holes to put the limit plates with screws.

But the hole in blue arrow has the female screw, while the one in red arrow has no female screw.

Can anyone give a instructions to put the upper glass back?

Thanks.
 

Attachments

  • IMG_1510.jpg
    913.2 KB · Views: 45
  • IMG_1511.jpg
    642.3 KB · Views: 40
OP
OP

sunhouwang

Member
Joined
Apr 4, 2017
Messages
40
Location
China
Format
Large Format
The upper three in blue arrow have the nuts to fasten the screw, while the lower three in red arrow have no nuts.
My question is, how to fasten the lower metal arms with screws if no nut inside, only by strong screw-in or other way?
 

Attachments

  • IMG_1516.jpg
    227.6 KB · Views: 25
  • IMG_1517.jpg
    236.6 KB · Views: 24

calebarchie

Subscriber
Joined
Jul 25, 2014
Messages
672
Location
Australia 2680
Format
Hybrid
sunhouwang said:
Local glass manufacturer cut it, 3mm thick.
Click to expand...

Isn't the top glass anti-newton as well?

sunhouwang said:
The upper three in blue arrow have the nuts to fasten the screw, while the lower three in red arrow have no nuts.
My question is, how to fasten the lower metal arms with screws if no nut inside, only by strong screw-in or other way?
Click to expand...

But you have 6 bolts no? Honestly looks like the square nut has fallen or is misaligned. I'm not sure how they are retained my machine is currently in storage so I can't quickly check - you might have better luck on LFF or by emailing Michael @ ScanSolutions.
 
OP
OP

sunhouwang

Member
Joined
Apr 4, 2017
Messages
40
Location
China
Format
Large Format
yes, the top glass is anti-newton one.

I also thought at first that a nut had fallen off, but when I shook the top cover, there was no nut shaking sound, and it was unlikely that all three would fall off at the same time.
I have sent an email to Michael, and I am waiting for a reply
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…