Guillaume Zuili

Aug 8, 2008 #1

Hi John !
When there is coffee... I'm always there !

Would love to get hint about these dev.
Take care, G.

 

Dennis S

Aug 8, 2008 #2

I LOOOVE coffee.

 

removed account4

Aug 9, 2008 #3

this is a recipe that whiteymorange gave me
a year or two ago:

Caffenol C

8 oz. water
4 slightly rounded tsp. instant coffee
2 tsp. washing soda
1000 mg Vitamin C (1/4 tsp powder)

i usually make it in 1L quantities and i don't measure at all,
let stand 20 and 25 mins.

( thanks whitey ! )

 

Toffle

Group owner

Aug 9, 2008 #4

I'm in.
I've been using Caffenol as a paper developer for quite some time now. (I haven't used it for film because I've always been afraid of ruining a film.) I've got an article on the process here:

http://tomoverton.images.googlepages.com/caffenol

I've posted an image in the gallery of a Caffenol print, The Old Pier at Point Pelee. It is fairly typical of my coffee-based prints.

Cheers,
Tom

 

Mattjcuk

Aug 10, 2008 #5

Hi,

I'm hopefully going to start my own developing in the next month or so and am interested in trying this method out.

Thanks

Matt

 

rwyoung

Aug 10, 2008 #6

Mmmmmm, coffee good...

 

Ralph Javins

Aug 10, 2008 #7

Tom, I don't know about this one. It almost sounds like a gross misapplication of a precious substance to me. This might call for a formal investigation. There is also the point that there may be differences in tolerance to the concept based on geographical location. I don't think it would fly out here in Latte Land.

Dances With Clouds; single line or multi?

Enjoy;

Ralph Javins

When they ask you how many megapixels you have in your camera, just tell them; "I use activated silver-bromide crystals for my storage medium."

 

Toffle

Group owner

Aug 10, 2008 #8

Ralph, I can't tell if you're knocking it or just afraid to spoil a nice cup. (There's always this: I never drink instant... I don't know anyone who does... There's got to be a reason that it's on the shelves, so I figure it must be for us photographers.) I'll say this though, I think I got very lucky on my first print. It was enough to get me hooked immediately. I've had more than enough failures along the way, but every once in awhile I'll get a print that just sings.

Cheers, mate.

 

removed account4

Aug 11, 2008 #9

nice print!
i never drink instant ( if i can help it )
unless i am overseas and someone gives me a cup,
i just smile and drink it thinking what a nice negative it would have made

when i process film, i usually use a variation of a caffenol C recipe whiteymorange gave me
8 oz. water
4 slightly rounded tsp. instant coffee
2 tsp. washing soda
1000 mg Vitamin C (1/4 tsp powder)

i never measure my ingredients, ( i just pour a lot of coffee and smaller amounts of the other two. )
sometimes, i cheat a little bit and add a little straight print developer into my brew. i had been using ansco 130
as my standard film and print developer so i just add a few oz.
typically i let stand for about 25mins, no matter what the film speed and they
have a nice contrast and stain to them. i am sure any print developer would
work as a "contrast enhancer" ...

i have gotten fond of re-using / replenishing my developer too.

 

rusty_tripod

Aug 11, 2008 #10

jnanian

Thanks for posting your formula.

Share a little more a replenishing the developer.

Finally does the caffenol only work with instant rather than brewed coffee? And how do people use it as a film developer. This is new to me, but as a coffee drinker, I find it intriguing. Especially, since I have viewed some good end products. I just have to figure out where to start.

My regular film developers are HC-110 and D-76 or Clayton. I have new bottle of Rodinal waiting in the wings. Primary film is TMax 100 or Arista II 400. I have some Ilford XP2 400 ASA that I need to learn how to develop with C41 chemicals.

Thanks for any insight.

 

removed account4

Aug 11, 2008 #11

hi rusty tripod

instant coffee is the stuff you want to use. robusta coffee beans make up most of the instant coffees
and they are filled with whatever it is that makes coffee good for developing film and paper.
some folks use folgers, but i tend to buy the cheep bottles of who knows what it is, from my local market.
when i replensh it i do not have a real methodology.
to give you an example of what i did recently -
i mixed up about 3litres of the developer ( with print developer ).
i processed 7 rolls of 120 film in it, and then another 7 rolls mixed 120+35mm.
the next time i processed ( the next day ) i took out about 100ML and added about 100ML of
the developer, and processed another 7rolls of film in it.
it was still good for more film if i wanted but since i had a good 4 days between processing, i am mixing fresh for
my next run.

i'm not sure if i was much help, i kind of wing it most of the time

have fun!

john

 

Toffle

Group owner

Aug 11, 2008 #12

Hi Rusty;
I agree with John, use any old rot-gut instant, and don't be too uptight about measuring. (unless you want really predictable results. )

Cheers,
Tom

 

Falkenberg

Aug 20, 2008 #13

I tried to coffee tone a cyanotype. It turned out that it toned the paper more than the picture. What can I do to tone the picture and not the paper.

 

Toffle

Group owner

Aug 20, 2008 #14

I've only ever toned a few cyanotypes. The more you read about it, they more you will find that the process is pretty arbitrary. For example, J Brunner's article on toning reverses the order of processes compared to other resources I've read, but apparently, they both work. So, you might change the order of your bleach/toning, or try a second bleach after the toning... Or you might drink your coffee and tone with tea like the rest of us.

 

titrisol

Aug 27, 2008 #15

Rusty tripod
4 tsp of coffee in 250ml (8 oz) is quite a lot, you really need to have a super-triple-expresso machine to get such amount of black stuff (tannins+caffeic acid) in the coffe... and it'll be a complete waste of a drink. So cheap instant cofee is better bang for the buck

The cool thing of this developer is that it can be measured in spoons and mixed quite recklessly.
Just remember to dissolve the washing soda (soda / sodium carbonate) first until all the grit is gone, then the vitamin C and finally the coffee.
More vitamin C gives more detail in the shadows and less stain, 4 g/l should be in the right alley so 1g in 250 ml is OK. You can raise it to 2g and get more "speed" from the film.

 

Toffle

Group owner

Sep 28, 2008 #16

I just uploaded a shot titled Self Portrait - Broken to the gallery. 'nother perfect pot of java ruined.

 

pjwaffle

Oct 3, 2008 #17

Hi, I wanted to learn more about coffee developers, so I joined this group... So is it basically like go to McDonalds and buy a coffee, or a bit more complicated, I want a simple easy to use high quality, NON TOXIC developer, so coffee looked good. I have a Olympus OM-707 (just so you know that I use 35mm film.)

 

Toffle

Group owner

Oct 4, 2008 #18

Not sure if McDonalds would do it... The stuff we use is mixed beastly strong. Still, for as many people who will tell you that the process is a waste, (of film and coffee) you will find as many who find that the results are worthwhile... even beautiful.

 

pjwaffle

Oct 6, 2008 #19

I have a question -- what is a good non-toxic fixer that is as easy to get as coffee is? One more question: I use color film, is there non-toxic chemicals for that too... I would use B&W film but I already have lots of color film and a lot the B&Ws use color chemicals.

 

titrisol

Oct 13, 2008 #20

Fixer is quite non-toxic
The toxic part is the silver coming from the film itself

 

Dennis S

Dec 1, 2008 #21

Hi all I am a virgin on coffee development but I really want to try it on 35mm film. My question is I can only get washing soda in 2kg (5lb) boxes. I was wondering how long the soda crystals will last in a air tight bag. Or should I use it up quickly (use it for washing clothes :"gasp). I can get the coffee in smaller containers so that won't be the problem. And you can use it on film AND prints but I am not sure of the different recepies or is it something I will have to find out myself. There are several that I will use when I begin. Thanks a head of time for the input.

 

Toffle

Group owner

Dec 3, 2008 #22

As far as I know, we're talking about pretty blunt tools here. I don't think a few months in a box is going to affect your results in any appreciable way. As for using coffee recipes on paper development, it works well with any standard recipe. I tend to mix it a little strong, but I don't know if that is really necessary.

Cheers, and enjoy your coffee.

 

Dennis S

Dec 5, 2008 #23

Yes it does look quite basic. But the old satement "don't let fear or common sence hold you back" I just say the toning that is done on a picture really brings out some nice qualities of the pics. This weekend sounds like a very good time to put my plans into practice.

 

Toffle

Group owner

Dec 12, 2008 #24

Do it... and post some results.
Cheers

 

Stephanie Brim

Dec 15, 2008 #25

Hey guys. Have any of you developed APHS in coffee with good results? I'm looking to get some of the film soon and I'm looking at interesting alternatives to dilute print developer or very dilute Rodinal.