Rodinal like paper developer that is DIY?

Table Rock and the Chimneys

A
Table Rock and the Chimneys

  • 3
  • 0
  • 88
Jizo

D
Jizo

  • 3
  • 1
  • 78
Top Floor Fun

A
Top Floor Fun

  • 0
  • 0
  • 64
Sparrow

A
Sparrow

  • 3
  • 0
  • 80
Another Saturday.

A
Another Saturday.

  • 3
  • 0
  • 136

Recent Classifieds

Forum statistics

Threads
197,403
Messages
2,758,458
Members
99,488
Latest member
JKB
Recent bookmarks
0

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
I've spent the past couple of days searching and seems like there's nothing as far as formulas go.
Here's my wishlist... an ascorbic/phenidone or dimezone developer in PEG that would last a long time that I could get something like 10ml and dilute into 1L. I know I'll need a second set of dry ingredients like borax and the like.
Has anybody done something like that? I know of at least one commercial product, the ars-imago PE paper Eco developer in 1L. Ars-imago says that it'd last 1 year from the manufacturing date and once opened it'd last 3 months. Dilution is 1+9. Ideally I'd love for the concentrate to last more than 3 months once opened.

Does anybody have a formula for something like that? Or a variation of something like PCTEA but for paper?
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,243
Location
West Midland
Format
Multi Format
Rodinal was recommended as a Paper developer, as well as for plates and films, some years ago. If I can find the Agfa book I'll give the dilution,

1744797532640.png


Ilford Certinal was also used as a paper developer, as were other Rodinal clones like Kodinol.

On that basis para-Rodinal should work. Essentially using Paracetamol (Tylenol) as the developing agent. Again you would need to add Bromide.

Ian
 

Don_ih

Member
Joined
Jan 24, 2021
Messages
7,324
Location
Ontario
Format
35mm RF
I had a liter of PC-TEA stock that I wasn't using for film and one night when I didn't feel like mixing a more standard print developer for some quick tests, I mixed it 1+20 and it worked quite well. The stock was about a year old. The developer was still working the next day. For mw, such a developer has the advantage that I can use my very hard faucet water and not get cloudiness.
I have taken to throwing in a tablespoon of sulfite to the half gallon. I don't know if it does anything but maybe keep the solution from turning too brown for a little longer.
 
OP
OP

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
Rodinal was recommended as a Paper developer, as well as for plates and films, some years ago. If I can find the Agfa book I'll give the dilution,

View attachment 396524

Ilford Certinal was also used as a paper developer, as were other Rodinal clones like Kodinol.

On that basis para-Rodinal should work. Essentially using Paracetamol (Tylenol) as the developing agent. Again you would need to add Bromide.

Ian

Yes, I thought of doing that but I’ve been liking the ascorbate based developers and I have the chemicals here, just want to save on the workflow and pretend like my paper developer was bought at the store and all I have to do is dilute instead of mixing from scratch.
 

Alan Johnson

Subscriber
Joined
Nov 16, 2004
Messages
3,219
It should be possible to make up Ryuji Suzuki's ascorbate developer DS-14 from this thread as a 2-part developer. The TEA and salicylic acid can be omitted with some reduction in the life of the working solution.
 

RalphLambrecht

Subscriber
Joined
Sep 19, 2003
Messages
14,555
Location
K,Germany
Format
Medium Format
I've spent the past couple of days searching and seems like there's nothing as far as formulas go.
Here's my wishlist... an ascorbic/phenidone or dimezone developer in PEG that would last a long time that I could get something like 10ml and dilute into 1L. I know I'll need a second set of dry ingredients like borax and the like.
Has anybody done something like that? I know of at least one commercial product, the ars-imago PE paper Eco developer in 1L. Ars-imago says that it'd last 1 year from the manufacturing date and once opened it'd last 3 months. Dilution is 1+9. Ideally I'd love for the concentrate to last more than 3 months once opened.

Does anybody have a formula for something like that? Or a variation of something like PCTEA but for paper?

I suggest to get a copy of 'TheFilm Developing Cookbook'. It's full of interesting ideas and recipes with tons of too experiment.
 

John Wiegerink

Subscriber
Joined
May 29, 2009
Messages
3,468
Location
Lake Station, MI
Format
Multi Format
When you say "Rodinal like paper developer" I think Kalogen is as close as you are going to get. I have used this homemade developer and it's a good one. I have a part full bottle made in 2016 that still worked about a year ago, but haven't checked it lately. As you can see, shelf life is not a problem. Also, it's highly concentrated so a little goes along way. Here is a post from Trask about Kalogen and Gerald Koch's version.

Trask
I copied this information from somewhere -- probably APUG -- back in 2005. The amounts aren't exactly as noted above, however.

"With Rodinal soon to be unavailable I thought the following formula might be of interest.

A developer called Kalogen was first marketed in 1917 by Paul L. Anderson. For years, photographers had favored a German developer called Rodinal. With the outbreak of World War I, Rodinal was no longer available. Anderson created Kalogen to remedy this situation. The formula appeared in his book
"The Technique of Pictorial Photography", J. B. Lippincott, 1939.

Distilled water (50°C) .................. 750 ml
Metol ....................................... 13.5 g
Sodium sulfite (anhy) ................... 180 g
Hydroquinone ............................. 53.0 g
Sodium hydroxide ........................ 35.0 g
Potassium bromide ....................... 5.0 g
Benzotriazole, 1% ........................ 80.0 ml
Distilled water to make ................. 1.0 l

Method of Preparation

Weight out the Metol and sulfite. Dissolve a pinch of the sulfite in the water before adding the Metol. Dissolve the other ingredients in the order given. A precipitate will form upon the addition of the hydroquinone which will dissolve upon the addition of the sodium hydroxide.

Transfer the solution to a 1 liter glass bottle, stopper and allow it to stand for 2 to 3 days. A small amount of impurities will precipitate out and the solution will become lighter in color. Filter the solution and transfer it to several small (2 to 4 ounce) glass bottles and label. When prepared correctly the solution will be a clear pinkish tan color.

When stored in nearly full and tightly capped small bottles, the stock solution will keep for months at room temperature. Should any crystals form due to storage at low temperature, they may be redissolved by warming and shaking the bottle.

The concentrate is diluted 1:30 to 1:60 for films. For 1:60 the average development time is 5 min @ 22C. Kalogen also makes an excellent paper developer when diluted 1:12 to 1:15 producing results similar to D-72. Develop 2 to 2-1/2 min @ 22C. The formula was published by Walter C Snyder, Dignan Newsletter, August 1973, pp 13-14.

Walter Snyder in the Dignan Newsletter article said that the original formula called for 9 grams of potassium bromide. He reduced the amount and added the benzotriazole. He made other changes to the original formula changing the Metol/hydroquinone ratio from 1:2 to 1:4. I have the feeling that he never adjusted the sodium hydroxide amount which may explain why there is an excess. I calculate 26 grams for 98% purity sodium hydroxide as enough to just create the phenolates."
 
OP
OP

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
Thank you! When I mentioned like Rodinal I meant the principle of a concentrate or maybe HC110 would have been a better comparison since I’m hoping to use PEG.

Unfortunately I don’t have any Hydroquinone and I’m trying to avoid buying it.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,043
Location
North Carolina
Format
Multi Format
para-Rodinal should work. Essentially using Paracetamol (Tylenol) as the developing agent.

FWIW, my understanding was that the developing agent in Parodinal is p-aminophenol, because the very high pH of the concentrate cleaves the acetyl group from the n-acetyl p-aminophenol that's Paracetamol/Tylenol/acetaminophen. The appearance of a pink tone in the concentrate after mixing is the sign that this has occurred, as p-aminophenol oxidizes and the oxidation product is pink in very low concentrations -- while acetaminophen doesn't oxidize the same way.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,043
Location
North Carolina
Format
Multi Format
They are simple but I don’t have hydroquinone.

The formula for Selectol Soft is on the Internet somewhere, and it was metol-only, no hydroquinone. But there's no reason Rodinal/Parodinal at three to five times film strength shouldn't work for prints (Dektol was originally a universal developer -- 1+1 or 1+2 for prints, 1+9 for film).
 

revdoc

Member
Joined
Apr 12, 2015
Messages
280
Format
35mm
You could try E72, which is a phenidone/ascorbate print developer. Quite a few people use it. I make it up as needed with spoon measures, usually 250ml at a time.

 
Joined
Jul 31, 2012
Messages
3,278
Format
35mm RF
You can certainly use Rodinal. I've done it before in a pinch. It isn't very economical if that is what you are after because paper developers are more concentrated than film developers. Plus Rodinal oxidizes quickly so it won't last long in a tray. It would only make sense if you used the Parodinal version and make it yourself.

Most developers will last a long time if you store them right. Use glass containers and butane/argon/heavy gas of your choice to seal them.
 

John Wiegerink

Subscriber
Joined
May 29, 2009
Messages
3,468
Location
Lake Station, MI
Format
Multi Format
Pretty hard to make a really good, long lasting paper developer without hydroquinone. E-72 might be your best bet. I have used it and it is a good developer, but went back to ID-78 and or A-130. Are you avoiding hydroquinone due to cost? Remember, it lasts a long time and a little goes a long way.
 
OP
OP

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
Partly cost and that I just ordered a bunch of chemicals to mix and won’t have to order more in a long time. Also due to toxicity and disposal. I have all the chemicals for E-72 and DS-14 but I was wondering if I could speed up the mixing by having the developing agents mixed in PEG or if there was a formula out there that had a concentrate either viscous or liquid to save time.
 
OP
OP

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
I’ve been using Ilford PQ developer for years and just recently decided to switch to mixing my own. I thought might as well go Ascorbic acid all the way, I already use XTOL and figured why not? So purchased all the stuff I needed and I’m sorta tied to ascorbic/phenidone/Dimezone for some time now.
 

John Wiegerink

Subscriber
Joined
May 29, 2009
Messages
3,468
Location
Lake Station, MI
Format
Multi Format
I’ve been using Ilford PQ developer for years and just recently decided to switch to mixing my own. I thought might as well go Ascorbic acid all the way, I already use XTOL and figured why not? So purchased all the stuff I needed and I’m sorta tied to ascorbic/phenidone/Dimezone for some time now.
Nothing wrong with going ECO and I use XT-3(Xtol) myself, but most of the chemicals used now in photography are not that bad. Some of the old timers here remember a certain fellow always saying that many of the cleaning products you have under your kitchen sink were much worse than most photo chemicals we use today. Still pays to play it on the safe side if you can. All I know is that my chemical shelf will probably never be void of hydroquinone.
 

ags2mikon

Member
Joined
Dec 19, 2009
Messages
564
Location
New Mexico
Format
Multi Format
I use brown glass bottles with poly cone caps for chemical storage and fill as close to the top as possible and add glass marbles if I teed to bring up the level to the top of the neck.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,043
Location
North Carolina
Format
Multi Format
Rodinal oxidizes quickly so it won't last long in a tray.

One solution for this (and if you're making Parodinal, you have the chemicals for it) is to add 30-40 g/l of sodium sulfite during dilution. Rodinal oxidizes quickly because the high dilution means there's little sulfite ij the working solution; it ought to last to capacity at 1:15 and 40 g/l sulfite.
 
OP
OP

Dani

Member
Joined
May 19, 2015
Messages
208
Location
USA
Format
Multi Format
That’s very interesting! I have plenty sodium sulfite here and a bottle of Rodinal. I’m going to experiment.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom