Nokton48
Member
- Joined
- Oct 8, 2006
- Messages
- 2,949
- Format
- Multi Format

- On the left is my Plaubel Makina IIIR, with 100mm F4.2 Rare Orthometar lens (their sharp lens), Makina Hood. Makina Yellow Filter. Also this camera has the Rare Focal Plane Shutter, with speeds to 1/1000 so high speed film can be used under bright conditions. To the right is my new Peco Junior, it's really not any bigger than my Makiflexes. I am delighted. Shown with Peco Jr Bag Bellows, and standard lens, late model 100mm F5.6 Schneider Symmar with Compur Shutter. There's a 6x9cm Makina 120 Back on the camera. Top right is the Magnifier (I think it is Plaubel!) Viewfinder I have tested it with all my Peco Junior lenses from 47mm to 210mm and it's becoming an important accessory. In right front is MX/521 Back for Plaubel Makina Double Rail Backs, I have three of these. A cool pop-up Viewfinder on the back I rebuilt and I also installed a nice fresnel behind the glass. Small and handy, slide the pop-up off, and attach a 6x6 or 6x9 Makina Roll Back.
Finally on the left front is the Standard Bellows, and the three parts (needs final assembly) of the Jim Galvin 120 Back. The board I got from Glenn fits the front of my Pecoflex, but not the Peco Junior. But I have a flat Rear Standard Plate original Peco that will be perfect for finishing this back. I made a spacer plate out of sawn alder wood in my shop, you see that on top. Peco Junior needs new front and back light seals, but in perfect working order. Like the Sinar Norma this camera locks down tight no play at all. And I have a number of original lensboards that need new light trapping. BTW They made a viewfinder set, so that the Peco Jr can be hand heldIt's lighter than the Makiflex I think, with perspective control. With a short rail it would be very desirable